Glock magazine release

Glock magazine release DEFAULT

Ratings & Reviews

Great product!

I originally purchased this product at the glockstore and after sending it back twice, once because the screws weren't set right and wouldn't tighten and twice because it was cut too short and wouldn't release the magazine. This product cost's a little bit more than some others but for the quality you get, and the time and hassle you save by not having to return a product multiple times, this is well worth it. This mag release was easy to install, looks nice, high quality, made accessing that hard to reach mag release on my gen 3's easier, it didn't interfere with my holster and IT WORKED THE FIRST TIME. I couldn't be happier with this product.

Awesome upgrade! (Note to users: acquire replacement screws)

I should start by saying that this is an awesome mag release; you cannot miss this thing! I was initially concerned that its size would cause me to unintentionally engage the mag release. This scenario never materialized, though. It also works with my Safariland 6365 holster. I don't know what kind of Hogwarts engineering magic ZT used to create such a huge mag release that doesn't impede operation, but I appreciate it! Now on the unfortunate reason for the downgrade. The button is held in place with a single miniature screw. If something happens to this screw (e.g., it shears or disappears), the benefits of the oversized release are lost. I'm a huge fan of redundancy when it can be applied effectively, so this is a single point of failure. You can still operate the firearm without the oversized thumb button but that comes at the price of reduced functionality. I’m writing this from experience! Please consider engineering another screw into the device or adding an extra to the kit.

Great design

I am in the process of building a Polymer 80 frame. I was surprised at finding a Zev Extended Mag Release for a price that fit my budget, I am glad I found it. The design overall is perfect for me. The button is positioned perfectly over the the release and the button felt good on my thumb, no slipping and did not feel bulky on my thumb.
<br>
<br>I plan on another build, once this one is complete and I recover funds. I will be adding another Zev mag release to that build as well, maybe with a colour change.

Worked great

love it does what it says

Awesome

Just received my ZEV EXTENDED MAG RELEASE FOR 1ST-3RD GEN, SMALL, BLACK. It was super easy to install, and makes reloads a breeze. Have no problem carrying in my holster whatsoever (Sidecar). It will not release until pressed even while driving. Thanks Zev.

Sours: https://www.zevtechnologies.com/ZEV-Extended-Mag-Release-1st-3rd-Gen-Small-Black

Match your slide cover plate and your mag bases with Hyve Technologies Gen4 extended magazine Release, machined from solid 6061 aluminum and designed so it wont tear up your magazines, the extended mag release makes it incredibly easy to find and depress the button, ensuring a faster reload.

**This will ONLY fit Gen4 models: 17,19, 22, 23, 26, 27, 31, 32, 33, 34, 35, 37, 38, 39**

** Will not fit: 42/43/36**

ALL COLORS ARE PROPRIETARY AND NOT MEANT TO MATCH GLOCK OR ANY OTHER MANFACTURER.

DISCLAIMER: ‘GLOCK’ is a federally registered trademark of GLOCK, Inc. or Glock Ges.m.b.H and is one of many trademarks owned by GLOCK, Inc. Neither Hyve Technologies nor this site are affiliated with, or otherwise endorsed by, GLOCK, Inc. or Glock Ges.m.b.H. The use of ‘GLOCK’ on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK products and parts visit www.glock.com.

Select Color

Black, Blue, FDE/Tan, Gray, OD Green, Purple, Red, Copper, Gold

Sours: https://hyve-technologies.com/product/gen4-extended-mag-release-for-the-glock/
  1. Glass church omaha ne
  2. House selling models images
  3. Stihl ignition coil replacement
  4. 2021 lexus gs price
  5. Well alright gif

Strike Industries Glock Gen3 Magazine Release — 4 models

The Strike Industries Mag Release for the Gen 1-3 Glock is a new modular upgrade for the Glock Gen 1-3. Included are two push buttons that are easily interchangeable. Both button faces are CNC milled from 6061 Aluminum, with mag release internal mechanism made from high density polymer that provides smooth ejection.

Compatible With: (Gen 1-3) Glock models 17, 17L, 19, 22, 23, 24, 26, 27, 31, 32, 33, 34, 35, 37, 38, 39

Specifications for Strike Industries Glock Gen3 Magazine Release:

Gun Make:Glock
Gun Model:Glock 37, Glock 26, Glock 32, Glock 31, Glock 23, Glock 19, Glock 27, Glock 33, Glock 39, Glock 34, Glock 35, Glock 22, Glock 24, Glock 17L, Glock 17, Glock 38
Model Generation:3, 1
Fabric/Material:Anodized Aluminum, CNC Milled from 6061 Aluminum, Polymer
Included Accessories:1 Polymer Body Bar, 1 M2 Screw, 2 Modular Aluminum Pushpad Buttons

Features of Strike Industries Glock Gen3 Magazine Release

  • Interchangeable push pads
  • Aggressive texturing on push pad to prevent slippage
  • Hybrid design with anodized aluminum and polymer body bar
  • Main body designed with polymer to minimize wear and tear on magazine retention cut-outs and polymer pistol body
  • Includes two interchangeable button heads

Package Contents:

  • Strike Industries Glock Gen3 Magazine Release
  • 2 Modular Aluminum Pushpad Buttons
  • 1 Polymer Body Bar
  • 1 M2 Screw
Sours: https://www.opticsplanet.com/strike-industries-glock-gen3-magazine-release.html

Superb

Easy to install, somewhat wider and significantly higher than the OEM mag release. Installed it on my G17 Gen4 with a medium backstrap. Before installing this extended release I had to break my grip to actuate the mag release (I grip the gun very high close to the bore axis). With this product, I don't need to do so. Mental note: add loctite to the two screws in case they get loose. So far it is quite sturdy. As usual, Glockstore delivers super-fast, thanks.

Great Upgrade

Installed on G19X and G17 Gen4. Easy to install. The extension makes releasing the magazine easier, especially on 19X. With this extension I am able to release magazine with my thumb without having to change my grip. Great addition and also does not interfere with my holster.
Thanks Glock store.

No More Tears With This Teardrop!

A great button for quick mag changes especially for those of us with large hands that have trouble pushing the spindly factory release. This is a must have accessory for any Glock!

Awesome little addon

This is a great product. Its a polymer Mag Release that's been drilled to take the Aluminum Extension. I was a little worried about that, but it fits great, looks great, and haven't had issues yet. If the tab does come undone, you still have the standard polymer button below so it will continue to work.

Perfect on my G34

Very happy with mine. Magazine lock-up is tight and positive & extension fits my thumb perfectly. There is no slop whatsoever when the mag is inserted; fit and finish are superb. The reason I purchased mine was because I wanted to release the mag without shifting my grip and this was perfect for my mid-to-large size hands and thick fingers. I'd buy another if GS released one with aggressive checkering.

Check hole alignment first!

I hate to give it three stars, but I had two problems.
First, the button was drilled of center, so when the button was pressed, it hit the frame, not releasing the magazine. Since it wasn’t a huge deal, I filed it down on the underside for an acceptable fit. This brings about the second issue, after taking the button off three times, I could feel that one of the screws didn’t have as tight a grip.
Hopefully it holds!
To be fair, I didn’t contact the Glock store about this, but I’m sure they would have taken care of it.

A must have

I just received my order and immediately installed the extended mag release on my Glock 19. It literally took less than 10 minutes! I must say I was somewhat skeptical until I tried it. This extended mag release is excellent! I’ve carried this firearm for 4 years and for the first time I can do a mag swap with ease. Great addition to my favorite cherry weapon. I highly recommend it.

If you are even considering it, just buy it.

One thing I hated about the Glock was the ergonomics of the magazine release. It drove me nuts because I don’t want to adjust my grip in a life and death situation. I got a cheaper extended release and it sucked. So I bought this teardrop model. I have to admit the overall quality was superior to the factor and other extended release I got. The overall function is perfect. I honesty couldn’t have asked for a better ergonomic fix to the factory release. I can’t speak to the holster release aspect. I use it purely as my tactical night gun. I keep it out next to my when I’m home, so it never goes in a holster. I have other guns for that. I highly recommend this part. Huge improvement to my overall satisfaction with the Glock 19.

Great product. Works well.

Be careful. It can be a problem with some holsters. I have a G26 with a N82 Revnant IWB holster. If I lean back in a chair just right it can release the magazine.

Will it fit ! Yes and no

I really love this ,so East to drop a magazine,with this little part ! But be aware as is it’s not illegal for IDPA unless it filed down to be able to fit through the hole in the frame!

Works great for smaller hands

Everything came as it was supposed to. Much bigger than I expected sticks out a quarter inch past the lower. However works really well do not have to adjust grip at all or even come off target great product

Best looking extended magazine release on the market

This was the best looking release I could find on the market. I’ve never installed one previously. It took a few minutes to install and looks perfect. I had watched the install video a few times before installing. Thank you Glockstore

Like it but don't love it

I ordered the tear drop for my G41. Installation was a breeze. I love the look and the color (red). However, my issue is that it definitely sticks out pretty far, too far for me. I will return this and get the checkered extended Mag catch, which is what I have on my 19X (and I LOVE it!).

tear drop magazine release install

I bought this for my Glock 9 x 19 gen 3. It works perfectly and makes dropping a mag easy with no grip adjustment at all. Just be advised that the spring is extremely stiff and a little difficult to pry out of the release but not bad if you have the right tool. I used a dental pick tool with a L shaped bend at the end and it made if easy

easy to install

installed on my 22 and 19 love them work great.

Great addition to my G26.5

The original mag release is a bit small for my hands causing me to change grip in order to drop the mag. With this, changing mags is no longer an issue. This sticks out quite a bit so it's much easier to reach with my thumb and no need to change my grip. The button has some edges to it so the grip on it is pretty aggressive. This might cause some issue with those who conceal since the button sticks out a bit.

Sours: https://www.glockstore.com/Tear-Drop-Mag-Catch

Release glock magazine

Agency Arms Magazine Release Glock 17, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39 Gen 3 Aluminum Black

Product Overview

Agency Arms Magazine Release for Glock Gen 3 Pistols incorporates high performance features including the enlarged serrated thumb pad and extended length (3/64" longer than standard). The Magazine Release is constructed from high quality aluminum and features a stylish Agency Arms logo engraving.

Agency Arms logo
Made In
warning-iconWARNING:

Specifications

Was the information on this page helpful?

Community Q&A

Customer Reviews

NOTE: Prices, specifications and availability are subject to change without notice. We reserve the right to correct typographic, photographic and/or descriptive errors.
Sours: https://www.midwayusa.com/product/1019226641
Glockstore Extended Rectangular and Tear Drop magazine releases - Good competition kit

Modular Magazine Release for Gen 4-5 GLOCK™

Package Contents:
1 x Mag Release (polymer)
1 x Mag Release button 1 (aluminum)
1 x Mag Release button 2 (aluminum)
1 x M2 Screw

Product Features:
- Includes two interchangeable button heads
- Aggressive texturing on push pad to prevent slippage
- Hybrid design with anodized aluminum and polymer body bar
- Main body designed with polymer to minimize wear and tear on magazine retention cut-outs and polymer pistol body

COMPATIBLE: For GLOCK™ Gen4 & Gen5 17 | 19 | 19X I 22 | 23 | 26 | 27 | 31 | 32 | 33 | 34 | 35 | 37 | 38 | 39 I 45
NOT COMPATIBLE: For GLOCK™ 36 | 42 | 43

DISCLAIMER:
-This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
--“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

-CALIFORNIA PROPOSITION 65 WARNING:-
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov

Sours: https://www.strikeindustries.com/si-g4-5-magrelease.html

You will also be interested:

The click of the door lock sounded like a rescue gong. Alice perked up when she heard the sound of her heels. Redhead nose. Personally, I do not understand such a relationship. So, the guardian of my body.



266 267 268 269 270