Dobinsons tacoma leaf springs

Dobinsons tacoma leaf springs DEFAULT

DOBINSONS REAR LEAF SPRINGS PAIR FOR TOYOTA TACOMA TO (LR)

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.

Tacoma Single Cab / Double Cab SB - " lb Constant Load

Tacoma Double Cab LB - " lb Constant Load

--
Dobinsons leaf springs for the rear of the Toyota Tacoma 4x4 and PreRunner models. These leaf springs will suit the following vehicles: Toyota Tacoma Dobinsons leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions. Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application. Note: Greasable bush kits, greasable pins, and u-bolts are available separately. These do not come with bushings.

 

Sours: https://boss-offroad.com/idobinsons-rear-leaf-springs-pair-for-toyota-tacomatolr.html

Leaf Spring Comparison: All-Pro, Allcan, Icon, Dobinsons, Deavers, Archive, Dakars

All-Pro: low quality import that is designed with narrower than stock junk bushings(!), with low arch, really long and often goes flat on a Double Cab with minimal weight. You will often see the shackle rotated way back. Also it doesn't have a spot to bolt the parking brake cable tab to. No overload

Alcan: Stupidly long design, requires Archive Hammer hangers to work properly, because with stock hangers, the leaves will rub the shackles, and has MAJOR design flaw that the 2nd leaf extends inside the shackle, which when driven offroad has caused dangerous binding, and shackle damage. No overload

Icon: This has been pretty decent I would say, but I have gotten some negative feedback, mainly its just underwhelming. No major design flaws, no shackle interference. Doesn't seem to be a very tough design, or enough lift. My biggest nitpick is they took a 10 leaf pack design, took a couple leaves out, and screwed up by making the stepping from leaf to leaf too wide, which seems like some customers report a lot of axle wrap, which exhibits as driveshaft vibration on take off and deceleration. Stage 1 and 2 are total of 7 thin leaves

Dobinsons: Newer but I like the design, it is affordable, and anyone considering an affordable option should investigate these. Has overload

Deavers: The U expo series is currently the best on the market, for now. With 3 stages to choose from. Note that the stage 2 & 3 have less arch due to being heavier duty. Has overload. The price is up there. (Don't buy their J66 lame wrap-central pack)

Archive: Archive Garage will be testing our own design leaf pack in the next few weeks. (Potentially available by summer) Archive set out to build a leaf spring that just plain works, high quality material, built in USA and has a full military wrap, bolted spring clips, tip inserts on all leave ends, correct bushing sleeve width. It will not have the issues like shackle scraping or jamming leaf into shackle, won't take an 'M' shape, isn't too long, issues which are so common.

Dakars: Pretty lame design overall, doesn't have a full military wrap, and has MAJOR design flaw that the 2nd/3rd leaves extend inside the shackle, which when driven offroad causes awful noises, dangerous binding, and shackle damage. Numerous customers have complained, I have contacted them and explained the issue, and it seems they purposely have done nothing to avoid serious warranty burden. They were just plain lazy, took their Hilux design and tossed in the Tacoma, called it good. Has overload. Also very short spring
Sours: https://tacoma3g.com/threads/leaf-spring-comparison-all-pro-allcan-icon-dobinsons-deavers-archive-dakars/
  1. Tesla sales in 2019
  2. List of oc episodes
  3. Public storage fort mill

Dobinsons Tacoma Leaf Springs Pair for Toyota Tacoma to (Light-Med Load)

Description

Dobinsons tacoma leaf springs for the rear of the Toyota Tacoma 4&#;4 and PreRunner models. These leaf springs will suit the following vehicles:

Toyota Tacoma , &#; Lift for Light/Medium Load Springs for standard Rear Load, standard bed.

Long bed models should use next step up spring, due to the extra length and weight of the vehicle.

Dobinsons Tacoma leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

Note: Greasable bush kits, greasable pins, and u-bolts are available separately. These do not come with bushings.

At a minimum, new bushings and u-bolts should be added to new leaf springs.  Here are those items:

Dobinsons Toyota Tacoma Rear Polyurethane Leaf Spring Bush Kit

Dobinsons Greasable Pin Kit for Toyota Tacoma and Tundra to (SP)

Dobinsons Rear U-Bolts for Toyota Tacoma to (UBK)

Sours: https://exitoffroad.com/product/dobinsons-rear-leaf-springs-pair-for-toyota-tacomatolr/

2" Rear Lift Quick Ride Kit for Toyota Tacoma Dobinsons

Dobinsons
Dobinsons - 2" Rear Lift Quick Ride Kit for Toyota Tacoma Dobinsons

(0) Reviews: Write first review

New

DOB-QRKTACOMA

Limited Supply: only 8 remaining

USD

High Quality cast steel lift blocks/spacers, painted black
Extended length u-bolts, zinc coated
Only to be used with OE height leaf springs QRKTACOMA
New extended length rear shocks are recommended
Fast and simple to install

New extended length rear shocks are recommended

Fast and simple to install

High Quality cast steel lift blocks/spacers, painted black
Extended length u-bolts, zinc coated
Only to be used with OE height leaf springs QRKTACOMA
New extended length rear shocks are recommended
Fast and simple to install

  • DOB-QRKTACOMA
  • DOB-QRKTACOMA
  • Dobinsons
  • Available
  • New
  • Item Requires Shipping
  • lbs.
  • W” x H” x L”
  • Free Shipping (Available for U.S. and U.S. Territories Only)

Comment Total Reviews (0)



  • Customer Reviews

Copyright © AMF Electrical. All Rights Reserved.
Powered by Web Shop Manager.

Sours: https://amfindustrialusa.com/irear-lift-quick-ride-kit-for-toyota-tacomadobinsons.html

Leaf dobinsons springs tacoma

Dobinsons LR Rear Leaf Springs Single Toyota Tacoma

Who is Dobinsons?

Dobinson is a company that specializes in producing suspension parts, mainly leaf and coil springs setups, particularly those from SUVs or offroading vehicles. The company was established in and has been providing quality parts for more than 70 years. 

Today, they have become one of the market leaders in Australia and is continuously growing by expanding its reach worldwide.

Dobinsons is considered the largest source of 4x4 suspension parts. Known for its quality and durability, it has become the brand of choice by enthusiasts who want to improve their suspension system. They have over spring specifications in their inventory, which are all designed through the use of the latest computerized software and technology. This allows them to produce professional and accurate end products.

Dobinson is located at a square meter facility that serves as their manufacturing hub and inventory warehouse. They offer a wide range of parts such as coil springs, torsion bars, leaf springs, Shackle kits, shock absorbers, U bolts, Centre bolts, polyurethane bushings, castor wedges, and other 4x4 accessories.

Purchase Dobinsons Products at Vivid Racing

If you want to have a suspension system that could work well in any condition, may it be for daily driving or a weekend excursion off the road, then Dobinson is the right brand for you. Their products are designed to work better than stock and allow you to perform your offroading duties worry-free. With a variety of suspension parts to choose from, Dobinsons would have the right product for you. Visit Vivid Racing and check out the list of parts that would fit your specific needs and vehicles.

Dobinsons Spring & Suspension™ at its sole discretion will repair or replace any products supplied by them that are found to be defective in either materials or workmanship providing that Dobinsons Spring & Suspension™ are actually notified in writing from the Client of the alleged defect within two years (2 years) from date of invoice for Coil Springs, Leaf Springs and Shock Absorbers, and within twelve months (12 months) from date of invoice for all other parts. Any claim not made within this period shall conclusively be deemed waived by the Client. Repair or replacement is pre-conditioned on the examination of the goods which on instructions from Dobinsons Spring & Suspension™ on, should be returned for further inspection to Dobinsons Spring & Suspension™ or to an Approved Importer.

Coil Springs listed in this catalogue have a 2 year warranty against the following:
  1. Faulty Manufacture
  2. Breakage
  3. Sagging (being loss of free height of more than 10mm)
Leaf Springs listed in this catalogue have the 2 year warranty against the following:
  1. Faulty Manufacture
  2. Breakage
  3. Sagging (being the loss of free camber by more than 12mm)
Shock Absorbers listed in this catalogue have a 2 year warranty providing the vehicle does not have a modified exhaust system.

Fridges listed in the catalogue have a 5 year warranty on the motor and a 1 year warranty on all other parts against:
  1. Faulty Manufacture
Winches listed in the catalogue have a 2 year warranty against:
  1. Faulty Manufacture
All other accessories listed in the catalogue have a 1 year warranty against:
  1. Faulty Manufacture
Dobinsons Spring & Suspension™ products are designed for normal use and are in no way, covered under warranty should the vehicle be used in any form of extreme sports, competition racing or produce lift of 50mm or more. It is the responsibility of the fitter, to ensure that the customer or the owner of the vehicle is aware of the warranty conditions under which the products have been sold. It is highly recommended that the words ‘Suspension Components Fitted are for Normal Use Only. Warranty Void if used in extreme conditions” is written on their receipt to avoid any confusion.

Dobinsons Spring & Suspension™ will not pay for costs incurred in forwarding or returning goods. This warranty does not cover and Dobinsons Spring & Suspension™ makes no warranty with respect to; (1) any merchandise that is abused, misused, misapplied, neglected or altered; or that is improperly or incorrectly installed or maintained or used; or that is subjected to abnormal conditions of use, temperature, moisture, dirt or corrosive matter; (2) Goods bought for industrial, mining or agricultural use; (3) Goods no longer required by Client; (4) Goods incorrectly chosen by Client; (5) Goods modified or altered by client; and (6) any merchandise, materials, parts or other components supplied by someone other than Dobinsons Spring & Suspension™.

Dobinsons Spring & Suspension™ shall not be liable for any expenses incurred by Client in order to remedy any defect in its product. Dobinsons Spring & Suspension™ shall not be liable for any consequential, special, indirect or contingent damage or expense arising Directly or Indirectly from any defect in its products or from use of any products.

Client agrees to indemnify and hold Dobinsons Spring & Suspension™ harmless from and against any loss, injury or damage, to person or property, that extends beyond the warranties set forth above, whether the claims against Dobinsons Spring & Suspension™ or the damages are incidental or consequential.

Installation of aftermarket items to your vehicle may adversely affect, void or violate the Manufacturers terms of warranty on your vehicle. Review the terms of your vehicle warranty prior to purchase and/or installation of any aftermarket part or accessory. Dobinsons Spring & Suspension™ does not make any representations or warranties of any kind as to suitability or fitness for a particular vehicle or purpose. Dobinsons Spring & Suspension™ shall not be responsible or liable for direct or indirect damages as a result of the purchase and/or installation of these aftermarket products.

For the Dobinson’s Warranty Form, please click here.
Sours: https://www.vividracing.com/dobinsons-lr-rear-leaf-springs-single-toyota-tacomaphtml
2018 Tacoma dobinsons 3 inch suspension

Dobinsons Rear Leaf Springs for Toyota Tacoma to (Heavy Load)


Dobinsons leaf springs for the rear of the Toyota Tacoma 4x4 and PreRunner models. These leaf springs will suit the following vehicles:

Toyota Tacoma " Lift Medium Load up to LBS of Rear Load, and " Lift for Heavy Load Springs for LBS of Constant Rear Load

Toyota Tacoma , " Lift Medium Load up to LBS of Rear Load, and " Lift for Heavy Load Springs for LBS of Constant Rear Load

Dobinsons leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

Note: Greasable bush kits, greasable pins, and u-bolts are available separately. These do not come with bushings.

Sours: https://www.amazon.in/Dobinsons-Springs-Toyota-Tacoma-Heavy/dp/B06XDGKKNB

You will also be interested:

Dobinsons Tacoma Heavy Duty Leaf Springs Pair for Toyota Tacoma to for +LBS

Description

Dobinsons heavy duty Tacoma leaf springs for the rear of the Toyota Tacoma 4&#;4 and PreRunner models.  These are some of the strongest off-the-shelf leaf springs offered for the Tacoma platform, for those people running really heavy rear accessory weight with items such as steel rear bumpers with swing outs, rack platforms, RTT&#;s, heavy canopies or toppers, or custom steel or aluminum canopies or toppers.

These Tacoma leaf springs will suit the following vehicles:

Toyota Tacoma &#; Lift for Heavy Load Springs for LBS of Constant Rear Load.   If you do not have this amount of weight on the truck, the lift will be too much and the ride quality will not be ideal.

Toyota Tacoma , &#; Lift for Heavy Load Springs for LBS of Constant Rear Load.  4th leaf down from the top can be removed to reduce spring rate, making springs medium load and giving &#; of lift with up to LBS of weight.

Specifications: 5+1 Leaves, Raised Height (55mm Lift, &#;), Super Heavy Duty, KG constant load

Dobinsons Tacoma leaf springs are manufactured from only the highest quality raw materials. We understand the importance of selecting not only the highest quality spring steel, but also the correct grade that will give the longest life under the harshest conditions.

Our design engineers ensure that all our leaf springs are designed specifically for each vehicle model, with consideration given to the load and height requirements for each application.

Note: Greasable bush kits (PBK), greasable pins (SP), and u-bolts (UBK) are available separately. These do not come with bushings.

Dobinsons Toyota Tacoma Rear Polyurethane Leaf Spring Bush Kit

Dobinsons Greasable Pin Kit for Toyota Tacoma and Tundra to (SP)

Dobinsons Rear U-Bolts for Toyota Tacoma to (UBK)

 

Sours: https://exitoffroad.com/product/dobinsons-rear-hd-leaf-springs-pair-for-toyota-tacomatolr/


712 713 714 715 716