Free Hatch Patterns
To download these free AutoCAD hatch patterns, simply right click on the patterns you want and choose Save Link As, then place the PAT file in a path included in your AutoCAD support paths.
Rules of Usage
- You may place these patterns on your system and use them in your drawings.
- You may not distribute these patterns in PAT form, instead refer associates to this page.
- You may not post them online (including web sites, ftp sites, bulletin boards, and other online services) for public downloading.
Credit: Watson Kilbourne of CompugraphX produced the highest quality hatch patterns available anywhere. Watson has donated these hatch patterns to the AutoCAD community.
Hatch Pattern Compatibility
The good news is that the hatch pattern format hasn't changed since it was first introduced years ago. Any hatch pattern you find should work with any previous or future version of AutoCAD!
2005 Hatch Pattern Snaps
There has been a change in behavior in AutoCAD 2005 regarding the object snaps on its geometry. In previous releases osnaps would honor hatches, in 2005 they are ignored by default. To turn on the snap to hatch, access the OPTIONS dialog (Tools menu), go to the Drafting tab, and in the lower left you will find the toggle.
Also there is a command line system variable OSNAPHATCH, set to 0 for off (no snap), 1 for on (snap).
This procedure will walk through the process of adding a hatch pattern to your system, all the way through the final step of adding the pattern to the AutoCAD BHATCH dialog.
Important Note: Autodesk changed the behavior of the BHATCH dialog beginning in version 2000. As a result of this change, the BHATCH dialog completely ignores the hatch slide contained in the slide libary. It choose instead to create a very small (nearing unreadable) swatch on the fly, which takes a significant amount of time if you have hundreds of patterns. As such this procedure may not be applicable unless you intend to compile your hatchs into a IMAGE menu.
Preparing the Pattern: The first step is to obtain or create a hatch pattern that you would like to add. For terms of discussion we will use the GRAVEL.PAT found floating on the web. I have no knowledge of the author. Note that this pattern does not have sufficient precision to properly display in large coordinate mapping, but should work well in most other applications. It has been reproduced here.
*GRAVEL, gravel pattern
228.0128, 0.720,1.000, 12.041365,0.074329, 0.134536,-13.319088
184.9697, 0.630,0.900, -12.041517,0.043315, 0.230868,-22.855925
132.5104, 0.400,0.880, -14.865942,0.061430, 0.162788,-16.116032
267.2737, 0.010,0.630, -20.024928,0.047565, 0.210238,-20.813558
292.8337, 0.000,0.420, -12.999910,0.048507, 0.206155,-20.409373
357.2737, 0.080,0.230, -20.024928,0.047565, 0.210238,-20.813558
37.6942, 0.290,0.220, -16.401180,0.035968, 0.278029,-27.524849
72.2553, 0.510,0.390, 23.086761,0.038097, 0.262488,-25.986321
121.4296, 0.590,0.640, 15.264264,0.047405, 0.210950,-20.884073
175.2364, 0.480,0.820, -12.045049,0.083045, 0.240832,-11.800763
222.3974, 0.240,0.840, 16.278789,0.032108, 0.311448,-30.833375
138.8141, 1.000,0.620, 9.219065,0.094072, 0.106301,-10.523844
171.4692, 0.920,0.690, -13.152853,0.049447, 0.202237,-20.021511
225.0000, 0.720,0.720, 0.707107,0.707107, 0.141421,-1.272792
203.1986, 0.650,0.840, -5.383564,0.131306, 0.076158,-7.539615
291.8014, 0.580,0.810, -3.156821,0.185695, 0.107703,-5.277462
30.9638, 0.620,0.710, 3.601470,0.171499, 0.174929,-5.656023
161.5651, 0.770,0.800, -2.213594,0.316228, 0.126491,-3.035787
16.3895, 0.000,0.810, 10.440154,0.056433, 0.177200,-17.542845
70.3462, 0.170,0.860, -11.704507,0.067267, 0.148661,-14.717408
293.1986, 0.770,1.000, -5.383564,0.131306, 0.152315,-7.463458
343.6105, 0.830,0.860, -10.440154,0.056433, 0.177200,-17.542845
339.4440, 0.000,0.190, -5.383893,0.117041, 0.170880,-8.373124
294.7751, 0.160,0.130, -12.082844,0.069843, 0.143178,-14.174643
66.8014, 0.780,0.000, 5.383564,0.131306, 0.152315,-7.463458
17.3540, 0.840,0.140, -13.601340,0.059655, 0.167631,-16.595424
69.4440, 0.290,0.000, -5.383893,0.117041, 0.085440,-8.458564
101.3099, 0.720,0.000, 4.118439,0.196116, 0.050990,-5.048029
165.9638, 0.710,0.050, -3.152963,0.242536, 0.206155,-3.916950
186.0090, 0.510,0.100, -10.049739,0.052342, 0.191050,-18.913923
303.6901, 0.620,0.620, -2.218801,0.277350, 0.144222,-3.461329
353.1572, 0.700,0.500, 17.117197,0.039715, 0.251794,-24.927563
60.9454, 0.950,0.470, -8.061673,0.097129, 0.102956,-10.192674
90.0000, 1.000,0.560, 1.000,1.000, 0.060000,-0.940
120.2564, 0.490,0.130, -8.061936,0.071982, 0.138924,-13.753520
48.0128, 0.420,0.250, 12.041365,0.074329, 0.269072,-13.184552
0.0000, 0.600,0.450, 1.000,1.000, 0.260000,-0.740
325.3048, 0.860,0.450, -12.206392,0.063246, 0.158114,-15.653274
254.0546, 0.990,0.360, 4.120817,0.137361, 0.145602,-7.134508
207.6460, 0.950,0.220, 21.470869,0.042182, 0.237065,-23.469474
175.4261, 0.740,0.110, 13.038344,0.039873, 0.250799,-24.829074
We could place this code into the file GRAVEL.PAT, place it into a search path, and refer to it at the HATCH prompt. However since our final goal is to have this pattern available in the BHATCH dialog, a little more work is required.
Adding the pattern: To add the pattern code to the ACAD.PAT file, it is first recommended that the existing ACAD.PAT (AutoCAD support directory) be backed up. In the event that something goes wrong we can restore without having to reinstall.
Open the original ACAD.PAT in a notepad or other ascii editor. It is a good idea to do a search to make sure that the pattern definition you are about to add does not already exist. If you do not care about the order that your pattern appears in the BHATCH list, then simply paste the contents of the pattern definition at the end of the file. If you would like to maintain alphabetical order, carefully find the appropriate position in the middle of the list and insert your pattern there.
Be sure to save the ACAD.PAT file (ascii text only).
Preparing a slide: The next step is to prepare a slide representing the appearance of the pattern definition. The following steps can be used to create a hatch representation in R14. For users other than R14, you may need to generate a polyline (with the same coordinates), hatch the polyline, then erase the polyline.
Enter pattern name or [?/Solid/User defined] <ANSI31>: GRAVEL
Scale for pattern <1.0000>: 5
Angle for pattern <0>: <ENTER>
Select hatch boundaries or press ENTER for direct hatch option,
Select objects: <ENTER>
Retain polyline? <N> <ENTER>
From point: 0,0
Arc/Close/Length/Undo/<Next point>: 16,0
Arc/Close/Length/Undo/<Next point>: 16,10
Arc/Close/Length/Undo/<Next point>: 0,10
Arc/Close/Length/Undo/<Next point>: C
From point or press ENTER to apply hatch: <ENTER>
The reason for the particular rectangle coordinates of 16x10 is to maintain the 1.6:1 ratio that the other hatch slides in the ACAD.SLB are created with.
Before we prepare the slide however, it is recommended that we enter paper space and create a viewport to represent the slide. Slides are clipped at the viewport boundaries, and it would be difficult to maintain this without the viewport.
New value for TILEMODE <1>: 0
ON/OFF/Hideplot/Fit/2/3/4/Restore/<First Point>: 0,0
Other corner: 16,10
Finally we are ready to prepare the slide. However before doing so it is recommended that you create a unique directory/folder to contain this and other slides. We will need to add more slides to this directory to rebuild the ACAD.SLB. For terms of this discussion, will use C:\SLIDES.
Issue the MSLIDE command, when prompted in the dialog enter C:\SLIDES\GRAVEL.SLD for the filename.
At this point we have our slide in the directory and ready to rebuild the ACAD.SLB.
Preparing to rebuild the ACAD.SLB: Just like we backed up the ACAD.PAT file, it is a very good idea to backup the ACAD.SLB file. You will also find this file in the AutoCAD support directory.
Since the SLIDELIB.EXE tool supplied with AutoCAD cannot simply append your slide to the SLB file, we will need to rebuild it from scratch containing the contents of the original SLB along with your slide.
Rebuilding the ACAD.SLB: Since SLIDELIB.EXE is an MS-DOS based tool, open an MS-DOS window and change to the slides directory.
The easiest way to supply input to SLIDELIB.EXE is to prepare a file using the DOS DIR command. In this case we are also using the /ON switch to order by name, and the /B switch for bare (no size, date) listing. Finally with the > sign we are redirecting the output to create (or overwrite) the file SLIDE.INP.
C:\SLIDES>DIR *.SLD /ON /B > SLIDE.INP
Now that we have an input file for the SLIDELIB utility, we can call it from the AutoCAD directory. For the most convenience, you may want to move or copy the SLIDELIB.EXE from the AutoCAD directory to the slides directory to eliminate the cryptic DOS path.
The Calling Command: C:\SLIDES>C:\PROGRA~1\AUTOCA~1\SUPPORT\SLIDELIB ACAD.SLB < SLIDE.INP
If SLIDELIB.EXE was copied/moved:
C:\SLIDES>SLIDELIB ACAD.SLB < SLIDE.INP
Overwriting the original ACAD.SLB
Use your preferred method to copy the new ACAD.SLB from the slides directory to the AutoCAD support directory, overwriting the old one.
The changes will be in effect immediately, simply issue the BHATCH command and see the rewards for your efforts.
- The process of adding the hatch SLD file to the ACAD.SLB can be significantly improved with the use of our Slide Manager software.
To view the largest previews click on the icon at the top
For those unfamiliar with the procedure for inserting .pat files, follow the instructions on our page
"How to import hatch patterns into AutoCAD"
Hatch files with the ".pat" extension must be placed in the "support" folder to be recognized and used by Autocad.
The "support" folder is located in:
documents and settings -> username -> application data -> Autodesk -> AutoCAD .... always go forward until you find the support folder.
To view all folders properly, you must enable the option to view hidden files and folders (in windows)
The complete path to exactly locate the support folder can be viewed in autocad> menu> tools> Options> File> "Support file search path" ...... read all with preview images ... >>
AutoCAD dwg hatch
Crawl space and gravel pattern .pat
Glass - Hatch patter .pat
Parquet hach patterns .pat
Roof hatch 01
Roofs with tiles and pantiles
Roof with tiles
Roof with tiles and pantiles 02
Self-locking floors .pat
[ IT ] Textures Database
Furnishings - Interior design
Paving for gardens
Graphic symbols - Signals
Legend of the finishes
Parks and Gardens
for Archweb Users
for premium users
- SINGLE PURCHASE
pay 1 and download 1
- Idrac 7 license keygen
- Totoro lego set
- Home for rent scottsdale
- Cisco codec pro
- Memorex mini projector review
Agenda of this solution:
Use the following steps to install hatch patterns based on the different operating systems:
Where to save the PAT-files
- Windows 10:
- C:\Users\<user name>\AppData\Roaming\Autodesk\AutoCAD <version>\Rxx.x\<language>\Support
- Rxx.x stands for a specific AutoCAD release version:
- <Release version>: R24.1: 2022; R24.0: 2021; R23.1: 2020; R23.0: 2019
- If you don't see the path above: The AppData and Application Data folders in the above paths are hidden folders
- If there is no longer a PAT-file of an existing hatch used in a drawing, use the express tool SUPERHATCH to try and bring in the custom hatch pattern (not available in AutoCAD LT).
- The default path is specified in the Support File Search Path listed under the Files tab in Options. It is usually the first one shown, pointing to the current user folder.
If the preference is to keep custom hatch patterns as well as other customization in a different location, the folder(s) need to be added to the applications search path.
To add a custom folder to the applications support file search paths
- Click the Application menu (the big "A" at the top left) Options.
- In the Options dialog box switch to tab "Files" and select node "Support File Search Path".
- Click "Add".
- Click "Browse...".
- In the "Browse for Folder"-dialog box, browse to and select the folder to add. Click OK.
- In the Options dialog box, click OK.
- On any drawing, type the HATCH command.
- Click the pull-down in the Hatch visor for Patterns and click Open Library.
- Click the drop-down arrow and select Add Patterns.
- Browse to the location of the custom .pat files, select them, and click Open.
- Custom hatch patterns files will automatically be copied to the following locations:
- AutoCAD for Mac 2016 and later: ~Home/Library/Application Support/Autodesk/AutoCAD <version>/Rxx.x/roaming/@<language>@/Support/Hatch Patterns
- AutoCAD for Mac 2011 to 2015: ~Home/Library/Application Support/Autodesk/roaming/AutoCAD <version>/Rxx.x/<language>/Support
- <Release version>: R24.1: 2022; R24.0: 2021; R23.1: 2020; R23.0: 2019
Note: Manually copying the PAT-files into the specified location will also work.
Loading a custom PAT-fileFollow these steps:
- Set system variable HPDLGMODE to 1.
- Enter HPDLGMODE into the command line.
- Type 1 and press Enter
- Enter command _HATCH. The "Hatch and Gradient"-dialog pops up.
- In selection list "Type" select "Custom".
- In field "Custom Pattern" click the 3 dots-symbol.
- The dialog "Hatch Pattern Palette" pops up. Select in the left frame the specific PAT-file and in the right frame the specific hatch pattern. Click Ok.
Editing PAT-files, using NotepadYou may edit the default PAT-files that are installed with AutoCAD by using Notepad and adding your custom hatch pattern data at the end of the file. There are two files: acad.pat (British units) and acadiso.pat (metric units) (AutoCAD LT: acadlt.pat and acadltiso.pat), which are located as noted above. Although line spaces are not required between hatch patterns pasted into the file, a blank line must be placed after the last hatch pattern definition in a PAT-file. If a blank line is not placed after the last hatch pattern definition, the last hatch pattern definition will not be accessible. You can add comments by preceding text with two semicolons ( ;; ).
Products:AutoCAD for Mac; AutoCAD LT for Mac; AutoCAD Products;
Well, what would he, Dimka, do all day without tight-fitting swimming trunks - he would not take out his hands all day out of. Your pockets. It would also be interesting.
Download hatch patterns
No, exactly, mom Nadya compared to how her friend sucks when she is still a schoolgirl. Olga sucked so well that he almost fainted when he finished her throat. And my penis did not fall as usual, but stood in Olga Vladimirovna's mouth, and she did not suck it much, looking into my eyes, massaging the testicles of a young. Guy with her fingers. I stroked the woman who had just given the best blowjob of my life through her jet black hair.Hatch Patterns - Download and Import
Registration, it was July 1st. Ildar called me to the Wedding, as a witness. I asked him, he is sure that he wants me to be at the wedding.
- Aew wrestling roster wiki
- 2 inch twill tape
- Poe heist guide
- Feeling myself lyrics clean
- Enterprise bmw 3 series
- Nike supply and demand analysis
- Mandolin chords and scales
- Allah 99 name youtube
- 8 masks in skyrim
- Happy birthday jasmine quotes
Does it fuck me. He has no money. dont give it to me, do you have money or not. Broke my phone. Smashed.