2004 corolla rear brakes

2004 corolla rear brakes DEFAULT

20 Best Toyota Corolla Rear Brakes Diagram of &#; Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Toyota Corolla Rear Brakes Diagram of Check our ranking below.

2, Reviews Scanned

SaleRank No. #1
Nilight NI-RS05 LED Light Bar Rocker Switch 5Pin Laser On/Off Rear Lights Rocker Switch 20A/12V 10A/24V Switch Jumper Wires Set,2 years Warranty , Blue
Nilight NI-RS05 LED Light Bar Rocker Switch 5Pin Laser On/Off Rear Lights Rocker Switch 20A/12V 10A/24V Switch Jumper Wires Set,2 years Warranty , Blue
  • Easy to install and use: 5 pin on-off rocker switch with SPST design (single pole single Throw), simple installation, freely turn on or off the light
  • Cool illuminated light: built-in two premium LEDs Emits soft light to illuminate the patterns, easy for you to find the switch in the dark
  • Sturdy and durable: made of high-quality plastic and well-conductive pins; laser-etched pattern, not easy to fade away
  • Wide application: Available for controlling LED light bar, LED work lights, fog lamps, driving lights, headlights, taillights, off road lights, etc
  • The package included: 1X 5 pin rocker switch, 1X jumper wires set, 1X diagrams
Rank No. #2
Bosch BS Blue Drum Brake Shoe Set for Toyota Corolla - REAR
Bosch BS Blue Drum Brake Shoe Set for Toyota Corolla - REAR
  • Precision engineered OE style design ensures proper fit for a no hassle installation
  • percent asbestos-free friction formulations for extended wear, consistent braking performance and long life
  • percent all-new steel provides durable construction for long life
  • Rust inhibitive coating prevents rust and extends durability
  • Set includes brake shoes for 1 axle (2 wheels); Bonded construction; Hardware kit not included
SaleRank No. #3
ACDelco Professional 18B Rear Brake Drum
ACDelco Professional 18B Rear Brake Drum
  • Inspected for balance; resulting in smooth brake operation and noise reduction
  • Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
  • Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Rank No. #5
Raybestos H Professional Grade Drum Brake Hardware Kit
Raybestos H Professional Grade Drum Brake Hardware Kit
  • Raybestos Disc Brake Hardware kit is built to precise specifications in form, fit and function
  • This hardware kit is manufactured under high quality standards and has high resistance to fatigue failure
  • It provides consistent, safe and balanced brake operation and eliminates brake noise, premature and uneven pad wear
  • Eliminates brake noise, premature and uneven pad wear
Rank No. #8
GOOACC 5PCS Auto Trim Removal Tool Kit No-Scratch Pry Tool Kit for Car Door Clip Panel & Audio Dashboard Dismantle -5PCS
GOOACC 5PCS Auto Trim Removal Tool Kit No-Scratch Pry Tool Kit for Car Door Clip Panel & Audio Dashboard Dismantle -5PCS
  • SAVE TIME, FRUSTRATION AND MONEY -There are 5 pcs different kinds of trim tools, including 4 pcs car door panel removal tool and 1 fastener remover to facilitate your needs when repairing.
  • PREMIUM GRADE NYLON -This tool set made of impacted resistant nylon fiber material with high level craftsmanship, tougher than common nylon one, it’ s non-toxic and eco-friendly designed.
  • ERGONOMIC DESIGN - GOOACC trim removal tool kit is made in accordance with ergonomics design with super lightweight and easy handheld features which effectively effort saving for various interior and exterior car trimming.
  • MULTI-USE - Works great for car audio/radio system installing or removing, door panel, moldings, emblems, window trims or automotive interior repairing and furniture restoration
  • % SATISFACTION GUARANTEED: Please contact our customer service if there's any question
Rank No. #11
Bosch BC QuietCast Premium Ceramic Disc Brake Pad Set For: Pontiac Vibe; Toyota Corolla, Matrix, Front
Bosch BC QuietCast Premium Ceramic Disc Brake Pad Set For: Pontiac Vibe; Toyota Corolla, Matrix, Front
  • Bosch dedicated engineering to platform specific premium materials, ensuring exceptional stopping power and quiet operation with low dust
  • Quiet operation with rubber core multilayer shim provides increased strength and insulation against noise
  • Advanced aerospace alloy used in patented copper free ceramic and semi-metallic friction formula is compliant with Copper Free legislation
  • Protective transfer layer extends pad and rotor life
  • Slots and chamfers for premium quality, fit, and function; hardware kit (where available) and synthetic lubricant included to perform a complete brake job
Rank No. #12
Rear Pair Complete Struts Assembly Shock Coil Spring Assembly Replacement for Corolla Matrix Pontiac Vibe L R
Rear Pair Complete Struts Assembly Shock Coil Spring Assembly Replacement for Corolla Matrix Pontiac Vibe L R
  • 【Specsification】OEM Design Direct Complete Strut Assembly Equipped with Strut Coil Spring & Mounts -Ready to Install.Don't need any special tools! Remove and replace the complete Strut Assembly in one piece
  • 【Fitments】Interchange Part NumberL,R Position:Rear Driver and Passenger Sider fit for Toyota Corolla , Toyota Matrix, Pontiac Vibe (FWD Models ONLY) (Please match your vehicle model at the left top)
  • 【Include】 2 x Rear Complete Strut Assembly
  • 【Safety】It is durably built and precisely engineered for improved vehicle control, proper damping and consistent balance. And it is fully tested to ensure a proper fit and performance with safe, easy installation
  • 【Notes】 To avoid you buying the wrong item, please check the description and compatibility chart carefully before your purchasing
SaleRank No. #13
Power Stop K Front Z23 Carbon Fiber Brake Pads with Drilled & Slotted Brake Rotors Kit
Power Stop K Front Z23 Carbon Fiber Brake Pads with Drilled & Slotted Brake Rotors Kit
  • Power stop Carbon fiber ceramic compound significantly Enhances braking Performance versus traditional ceramic brake pads
  • Low dust braking validated through on vehicle 3rd party tests in Los Angeles, showing on average 30 percent less dust versus OE
  • Dual layer high temp rubberized shims insulate Noise for virtually silent braking
  • Drilled & Slotted Performance rotors for Maximum Cooling. They are zinc plated for Maximum Protection against rust.Rotor Material:Iron
  • Brake rotor, pad & hardware Engineered to work together to increase sTopping Power, Improve durability & eliminate dust
Rank No. #14
ACDelco Silver B Bonded Rear Drum Brake Shoe Set
ACDelco Silver B Bonded Rear Drum Brake Shoe Set
  • Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Quality validated for proper metallurgy and correct brake plate thickness
  • Non-directional brake surface finish for consistent braking
  • Available in riveted and bonded for various vehicle applications

Last update on / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Toyota Corolla Rear Brakes Diagram?

Do you get stressed out thinking about shopping for a great Toyota Corolla Rear Brakes Diagram? Do doubts keep creeping into your mind? We understand, because we&#;ve already gone through the whole process of researching Toyota Corolla Rear Brakes Diagram, which is why we have assembled a comprehensive list of the greatest Toyota Corolla Rear Brakes Diagram available in the current market. We&#;ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it&#;s still crucial that you do thorough research on your own for Toyota Corolla Rear Brakes Diagram that you consider buying. Your questions might include the following:

  • Is it worth buying an Toyota Corolla Rear Brakes Diagram?
  • What benefits are there with buying an Toyota Corolla Rear Brakes Diagram?
  • What factors deserve consideration when shopping for an effective Toyota Corolla Rear Brakes Diagram?
  • Why is it crucial to invest in any Toyota Corolla Rear Brakes Diagram, much less the best one?
  • Which Toyota Corolla Rear Brakes Diagram are good in the current market?
  • Where can you find information like this about Toyota Corolla Rear Brakes Diagram?

We&#;re convinced that you likely have far more questions than just these regarding Toyota Corolla Rear Brakes Diagram, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Toyota Corolla Rear Brakes Diagram, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Toyota Corolla Rear Brakes Diagram. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Toyota Corolla Rear Brakes Diagram buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top list of the best available Toyota Corolla Rear Brakes Diagram currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Toyota Corolla Rear Brakes Diagram has a value all its own. Most brands offer some sort of unique selling proposition that&#;s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Toyota Corolla Rear Brakes Diagram?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Toyota Corolla Rear Brakes Diagram.
  5. Customer Ratings: Number ratings grade Toyota Corolla Rear Brakes Diagram objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Toyota Corolla Rear Brakes Diagram.
  7. Product Quality: You don&#;t always get what you pay for with an Toyota Corolla Rear Brakes Diagram, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Toyota Corolla Rear Brakes Diagram is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Toyota Corolla Rear Brakes Diagram information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Toyota Corolla Rear Brakes Diagram is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We&#;re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Sours: https://romanceuniversity.org/toyota-corolla-rear-brakes-diagram-2/

Toyota Corolla Rear Drum Brake Shoes Replacement Guide
How to replace the rear drum brake shoes and springs on a Toyota Corolla with picture illustrated instructions.

Corolla Rear Wheel
Loosen Five Lug Nuts
Raise Rear of Vehicle
This automotive "how-to" guide was specifically written to assist owners of the ninth generation (, , , , & ) Toyota Corolla in replacing the rear drum brake shoes and springs.

Owners of other Toyota, Lexus, Scion or related Pontiac vehicles with rear drum brakes such as the Camry, Sienna, Tercel, Tacoma, Hilux, X-Runner, RAV4, Solara, 4Runner, Land Cruiser, Yaris, Matrix, Prius, Celica, Tundra, Paseo, Echo, Pickup and Vibe may also find these DIY instructions to be helpful.

The tools needed to complete this rear brake job include a floor jack, jack stands, a lug nut wrench or tire iron, pliers, needle nose pliers or brake spring pliers, brake caliper grease, brake cleaner spray, and a flathead screwdriver.

You'll need a new set of rear brake shoes and I'd also  recommend buying a drum brake "spring kit" or "hardware kit" such as the Wagner H so that you can replace the worn out old springs.

A few of the compatible aftermarket brake shoes for the Toyota Corolla include the following with their respective part numbers: Dura International BS, RaybestosPG, Monroe BX, Beck Arnley or , Centric , Wagner ThermoQuiet PAB, Wearever NB or NB, Toyota and Bendix R

Please note that some of these brake shoes are specific to Corolla models built in Japan which have VIN numbers that start with a "J". Most of them are for USA/Canada built Corollas which have VIN numbers that start with a "1".

Please use the Amazon Part Finder website to verify the correct replacement part numbers.

Two other compatible "brake hardware" spring kits include the RaybestosH and Beck Arnley .

Rear Drum Brakes
Raybestos PG Shoes
Tap Brake Drum
The first steps are to chock the front wheels to prevent the vehicle from moving, slightly loosen the five lug nuts on each rear wheel with a tire iron, raise the rear of the car with a floor jack and securely support it with jack stands.

Then spin off the lug nuts, remove the rear wheels and mark the relationship of the rear brake drum to the wheel hub (center circle) with a Sharpie marker.

This is done so that you can re-install the drum in the same position without changing the dynamic balance of the assembly.

Spray Drum With WD
Spare Tire Screw
Insert 12mm Bolt In Hole
The next step is to remove the drum from the rear wheel hub.

You may be able to just pull off the drum, but chances are it won't be that easy due to corrosion and rust.

First try tapping the brake drum with a rubber mallet or a hammer and a piece of wood to break it free from the hub.

Spraying the area where the hub meets the drum with WD can also help.

If that doesn't work, remove the 12mm spare tire hold-down screw from the trunk and insert it into one of the two holes on the front of the brake drum.

Slowly turn the screw in clockwise until you hear the drum begin to make popping noises.

Please note, we used a regular 12mm hex head bolt with a socket and ratcheting wrench.

If you use the spare tire hold down screw, turn it by hand as far as possible and then use a pair of locking pliers or regular pliers to continue turning it clockwise.

Use 12mm Bolt - Push Off Drum
Remove Brake Drum
Brake Cleaner Spray
Once the brake drum is free, pull it off the hub and set it aside in a safe place.

Thoroughly clean off the rear brake assembly with some brake cleaner spray and allow it to dry for a few minutes.

Place some shop rags or a pan below the assembly to catch the fluids.

Do not use compressed air to clean off the brakes to help avoid inhaling the brake dust.

Ready To Replace Shoes
Remove Hold Down Spring
Hold Down Springs Removed
I'd recommend studying how the rear drum brake assembly is put together before taking anything apart.

It's also a good idea to remove the drum on the other side of the car to have that assembly as a reference when installing the new brake shoes.

Release the two hold down springs/cups with a pair of needle nose pliers.

Push in on the cup to compress the spring and rotate it until the flat part of the pin can be passed through the small rectangular hole in the cup.

Place the old parts down on the floor or a rag in the same position as they were installed on the assembly to help yourself with the re-assembly later.


Remove Lower Spring
Retract Adjuster Mechanism
Reducing Tension On Springs
Then unhook the lower spring that holds the bottom parts of the two old brake shoes together.

Next remove the rubber cap from the rear of the backing plate and use a short flathead screwdriver to turn the splines on the automatic adjuster mechanism until it retracts and the tension on the two upper springs is reduced.

Remove Outer Spring
Release Inner Spring
Brake Shoes Released
Use the needle nose pliers or spring pliers to release the outer top spring.

Remove the small metal automatic adjuster lever.

Release the inner top spring and pull the front shoe away from the backing plate.

Parking Brake Lever
Open "C" Clip
Old "C" Clip Removed
The rear brake shoe is held to the assembly by the parking brake lever and the parking brake cable.

Pop the parking brake cable out of the hook on the parking brake lever. Open the old "C" washer with a pair of pliers and separate the parking brake lever from the old rear brake shoe.

Other Side - For Reference
Crimp New "C" Washer
Attach Parking Brake Cable
Attach the parking brake lever to the new rear brake shoe with a new "C" washer and crimp it closed with the pliers.

Pop the parking brake cable back into the hook at the end of the parking brake lever.

Rear Brake Shoe Assembled
Test Fit Rear Brake Shoe
Lubricate 6 Contact Points
Lubricate the six raised contact points on the surface of the backing plate with small dabs of brake caliper grease.Toyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-Guide
Install Rear Shoe
Insert Hold Down Pin
Hold Down Spring & Cup
Install the rear brake shoe on to the backing plate so that the hole in the middle of the shoe lines up with the hole in the backing plate.

Push the hold down pin through the rear of the backing plate and through the middle of the new rear brake shoe.

Place the spring and cup over the shoe until the flat tip of the pin passes through the rectangular hole in the cup.

Rotate the cup 90 degrees or 1/4 turn to secure the pin in place.

Rear Shoe Installed
Lubricate Adjuster Assembly
Install Adjuster
Lubricate the moving parts of the automatic adjuster assembly with some brake caliper grease.

Test fit the automatic adjuster on to the rear brake shoe using the other side or the picture above as a reference.

Please note, there may be some minor differences between and Corolla models.

Always use the other side of your vehicle as the definitive point of reference when re-assembling the drum brakes.

Install Adjuster Lever
Metal Lever Installed
Front Shoe Hold Down Pin
Install the adjuster lever on to the rear brake shoe and into the outer slot on the automatic adjuster.Toyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-Guide
Install Front Brake Shoe
Install Hold Down Spring/Cup
Rotate Pin To Secure Cup/Spring
Install the front brake shoe and secure it with the hold down pin, spring and cup.Toyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-Guide
New Shoes Installed
Automatic Adjuster & Lever
Install New Rear Spring
Match up the old springs with the new springs in the brake hardware kit before continuing to the next steps.

Install the inner top spring on the brake shoes by first hooking it into the front shoe and then pulling it to the rear shoe with a pair of needle nose pliers or spring pliers.

Double check that you have installed it into the correct holes by referencing the other side of the car.

If you have trouble installing the inner top spring, try temporarily removing the automatic adjuster to give yourself more working room.

Rear Upper Spring Installed
Install Lower Spring
Lower Spring Installed
Then move to the bottom of the brake assembly and install the lower spring.Toyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-GuideToyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-GuideToyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-Guide
Installing Upper Outer Spring
Move back to the top of the brake assembly and install the top outer spring by hooking it to the front shoe and then pulling the other side over to the adjuster lever on the rear shoe.

Double check that you have installed the two top springs and one lower spring in the correct positions by referencing the drum brake assembly on the other side of the car.

Upper Outer Spring Installed
Turn Adjuster Screw
Putting Tension On Springs
Insert the short flathead screwdriver through the access hole in the rear of the backing plate and turn the teeth on the automatic adjuster mechanism.

Expand the adjuster mechanism until there is some tension on the two upper springs.

New Brake Shoes Installed
Upper Springs
Lower Spring
Do one last final check to ensure that the drum brake assembly on this side of the car matches the other side.

You will be using this side as a reference for completing the procedure correctly on the other side of the vehicle.

Cleaning Brake Drum
Double Check Other Side
Once the brake shoes and springs have been replaced on both sides of the vehicle, you can clean off the brake drums and re-install them over the rear hub assemblies.

If you'd like to replace the brake drums, check out the options available at Amazon.com.

Everything Installed Correctly
Replace Brake Drum
Pull Parking Brake Handle
Slide the brake drums back over the wheel hub assemblies with the Sharpie marker lines aligned together.

Go into the passenger cabin of the vehicle and pull on the emergency / parking brake handle several times.

The automatic adjuster mechanism should make the handle a bit harder to pull each time and have less travel.

Replace Wheel
Spin On Five Lug Nuts
Tighten Lug Nuts
Replace the rear wheels, spin on the lug nuts by hand to prevent them from becoming cross threaded, and tighten them down to about ft lbs of torque.

It would be best to use a torque wrench or an electric impact wrench with a torque stick to properly tighten the lug nuts.

Lower the vehicle from the jack stands and remove the chocks from the front wheels.

Sit in the driver seat of the vehicle and pump the brake pedal a few times to ensure that there is adequate brake line pressure.

If the pedal is overly soft or "mushy", you may need to bleed the brake lines.

For more, check out my other Toyota Corolla Repair & Maintenance Guides.

If you have a newer model check out my Toyota Corolla Repair & Maintenance Guides.

Sours: https://paulstravelpictures.com/Toyota-Corolla-Rear-Drum-Brake-Shoes-Replacement-Guide/index.html
  1. Western auto catalog pdf
  2. Right lateral ventricle function
  3. Ip puller ps4 party
  4. One ocean diving reviews
  5. Loki tv series reddit

Toyota Corolla Repair Manual: Overhaul


: overhaul the rh side by the same procedures with lh side.

1. Remove rear wheel

2. Drain brake fluid



: wash the brake fluid off immediately if it comes into contact with any painted surface.

3. Remove rear brake drum sub–assy

  1. Release the parking brake lever, and remove the brake drum.


    : if the brake drum cannot be removed easily, do the following steps.

  2.  remove the hole plug and insert a screwdriver through the hole in the backing plate, and hold the automatic adjusting lever away from the adjuster.
  3.  using a another screwdriver, reduce the brake shoe adjuster by turning the adjusting wheel.

4. Inspect brake drum inside diameter

  1. Using a brake drum gauge or equivalent, measure the inside diameter of the drum.

    Standard inside diameter: Mm ( In.) Maximum inside diameter: Mm ( In.)

5. Remove rear brake automatic adjust lever lh

  1. Using a needle–nose pliers, remove the upper side tension spring.
  2.  remove the rear brake automatic adjust lever lh from the rear brake shoe.

6. Remove front brake shoe

  1. Using a needle–nose pliers, remove the anchor side tension spring.

  1. Using sst, remove the cup, shoe hold–down spring and pin.

    Sst –

  2.  disconnect the upper side return spring from the front brake shoe, and remove the front brake shoe.

7. Remove parking brake shoe strut set lh

8. Remove rear brake shoe

  1. Using sst, remove the cup, shoe hold–down spring and pin.

    Sst –

  1. Using a needle–nose pliers, disconnect the parking brake cable no.3 And remove the rear brake shoe.
  2.  remove the upper side return spring from the rear brake shoe.

9. Remove rear brake parking brake shoe lever sub–assy

  1. Using a screwdriver, remove the c–washer and parking brake shoe lever.

Inspect rear drum brake shoe lining thickness

  1. Using a ruler, measure the thickness of the shoe lining.

    Standard thickness: Mm ( In.) Minimum thickness: Mm ( In.)

If the lining thickness is at the minimum thickness or less, or if there is severe, uneven wear, replace the brake shoe.

Inspect brake drum and rear drum brake shoe lining for proper contact

  1. Apply chalk to the inside surface of the drum, then grind drum on the brake shoe lining to fit.

If the contact between the drum and the shoe lining is improper, repair it using a brake shoe grinder or replace the brake shoe assembly.

Remove rh, front or upper rear wheel brake cylinder assy

  1. Using sst, disconnect the brake tube, use a container to catch brake fluid.

    Sst –

  2.  remove the bolt and wheel cylinder.

Remove rear wheel cylinder cup kit

  1.  remove the 2 cylinder dust boots from the wheel cylinder.
  2.  remove the 2 pistons and compression spring.
  3.  remove the 2 wheel cylinder cups from each piston.
  4.  remove the bleeder plug cap and bleeder plug from the wheel cylinder.

Inspect brake wheel cylinder

  1.  check the cylinder bore and piston for rust or scoring.

Install rear wheel cylinder cup kit


  1. Temporary tighten the bleeder plug to the wheel cylinder, and install the bleeder plug cap.
  2.  apply the lithium soap base glycol grease to 2 new wheel cylinder cups and the 2 pistons.
  3.  install the 2 wheel cylinder cups to each piston.
  4.  install the compression spring and 2 pistons to the wheel cylinder.
  5.  install 2 new cylinder dust boots to the wheel cylinder.

Install rh, front or upper rear wheel brake cylinder assy

  1.  install the wheel cylinder with the bolt.

    Torque: 10 nvm ( Kgf·cm, 7 ft·lbf)

  2.  using sst, connect the brake tube.

    Sst –
    torque: Nvm ( Kgf·cm, 11 ft·lbf)

Application high temperature grease

  1. Apply the high temperature grease to the shoe attached surface of backing plate.

Install rear brake parking brake shoe lever sub–assy

  1. Using a pliers, install the parking brake shoe lever with a new c–washer.

Install rear brake shoe

  1. Using a needle–nose pliers, connect the parking brake cable no.3 To the parking brake shoe lever.

  1. Using sst, install the rear brake shoe, pin, shoe hold– down spring and cup.

    Sst –

Install parking brake shoe strut set lh

  1. Apply the high temperature grease to the adjusting bolt.
  2.  install the parking brake shoe strut set lh to the rear brake shoe.

Install front brake shoe

  1. Connect the upper side return spring to the front brake shoe.

  1. Using sst, install the front brake shoe, pin, shoe hold– down spring and cup.

    Sst –

  1. Using a needle–nose pliers, install the anchor side tension spring to each shoe.

Install rear brake automatic adjust lever lh

  1.  install the rear brake automatic adjust lever lh to the rear brake shoe.

  1. Using a needle–nose pliers, install the upper side tension spring.

Check rear drum brake installation

  1.  check that each part is installed properly.


: there should be no oil or grease adhering to the friction surfaces of the shoe lining and drum.

Install rear brake drum sub–assy

Adjust rear drum brake shoe clearance

  1. Temporarily install the hub nuts.
  2.  remove the hole plug, and turn the adjuster and expand the shoe until the drum locks.

  1. Using a screwdriver, back off the adjuster 8 notches.
  2.  install the hole plug.

Fill reservoir with brake fluid

Bleed master cylinder 

sst –

Bleed brake line

Check fluid level in reservoir

Check brake fluid leakage

Install rear wheel

Inspect parking brake lever travel

Adjust parking brake lever travel

Other materials:

Hint: components: 1. Discharge refrigerant from refrigeration system sst – (–, –, –, –, –, –) 2. Disconnect cooler refrigerant suction hose no.1   Remove the bolt and disconnect the cooler refrigerant suction

Wiper rubber lh
Replacement 1. Remove fr wiper blade lh  remove the front wiper blade lh from the front wiper arm lh. Notice: do not fold down the front wiper arm with the front wiper blade being removed from it. 2. Remove wiper rubber lh  remove the front wiper rubber lh from the front wi

1. Power window system circuit 2. Inspect power window regulator master switch assy Inspect the master switch continuity. [Driver’s switch (window unlock and lock)] Standard: [Front passenger’s switch (window unlock)] standard: [Front passenger’s switch (window lock)] standa

© Copyright www.tcorolla.net


Sours: http://www.tcorolla.net/overhaulhtml

Replacing the brake drums and shoes is a pretty straightforward repair. The main thing is remembering how everything goes together. This article includes lots of pictures to help in getting all of the brake components back into the correct positions.

Note: If you buy through links on our site, we may earn an affiliate commission – at no cost to you.


I had replaced the rear bearing on the Toyota Corolla, and while inspecting the rear brakes, I decided it was time to change them. Usually the rear brakes wear down quite a bit more slowly than the front brakes, however, the parking brake activates the rear brakes, so it is a good idea to make sure they aren&#;t too worn down.

The following article details the process I went through to change the rear brake shoes and drums on a Toyota Corolla. This should be similar for Toyota Corollas with rear drum brakes.

If your front brakes are bad, check out this post on how to change the front brake pads on a Toyota Corolla.

Tools you&#;ll need:

Parts and supplies:

Alright, let&#;s get started!

How to Change Rear Brake Drums and Shoes

The first step is to jack up the rear wheel, and put a jack-stand under there. Pry off the hubcap and set it aside.


Remove the lug nuts. I use a socket wrench or impact wrench. If you are not using air tools at this point, and you are doing this sort of repair, you owe it to yourself to get an air compressor and some air tools. You can easily 1/2 the time it takes you to do most of these sorts of repairs and maintenance. By the way, if you don&#;t have an air compressor to power a pneumatic impact wrench, check out this DeWalt impact wrench that runs on lithium ion batteries&#; I never thought I&#;d see the day when a battery-powered impact wrench was a legitimate tool!

Remove the wheel and set it aside. If the wheel is rusted on, check out this post on how to remove rusted-on wheels, and how to prevent it in the future.

If the brake drum is rusted onto the hub, don&#;t feel bad, this is very common. Use the 2 holes in the drum. Insert a bolt into those and tighten it slowly until the drum pops off. These were metric in my case, M8 x mm (8 mm diameter with mm thread pitch). I don&#;t have picture of the old brake drums, but take a look at the new ones. The 2 holes that are not being used are the removal holes.


Slide the brake drum off of the hub.

This is what you will be faced with. The following are a couple of photos showing the old brakes, and the positions of the components. The photo on the top is the top portion of the brake assembly and shows the position of the brake cylinder, and the photo on the bottom shows the bottom. Note in particular the position of the tiny springs and connectors.


I ordered the brake shoes, drums, and hardware kit from Amazon, but should be available from any parts store. In case it is helpful, here are the part numbers:

Toyota corolla rear brake hardware kit.

Carefully clean off all of the brake dust, dirt, and grime, so that you can see where everything is connected. Then take some photos. You are then ready to begin removing parts.

After removing the components, assemble the shoes and new hardware components the same way. Here is a shot of the fully assembled hardware. A pair of brake spring pliers will greatly ease the stretching and assembly of the tight brake springs.


Here is a shot focusing on the bottom portion.


I spread some anti-seize on the hub, so that the drum will not rust to the hub next time.


If your drivers-side brake cylinder or passengers-side brake cylinder is corroded or leaking, consider replacing them.

I also primed and painted the brake drum for aesthetic reasons, and so that it wouldn&#;t rust.

Slide the brake drum onto the hub.


Now put the wheel back on and tighten the lug nuts by hand. Then torque them to 76 ft-lbs, working in a &#;star&#; pattern. This is the torque wrench I use. Remember to release the tension on it when you are storing it.

Remove the jack-stand and lower the jack.

Nice work! Repeat the process on the other rear wheel.

That completes the job.

The following is included for your info, and includes links for the parts/tools that I used for this job.

Parts and Tools used for this job:

Check out this post for how to change the front brakes on a Toyota Corolla!

Like this:



Sours: https://practicalmechanic.com//10/21/how-to-replace-rear-brake-drums-and-shoes-on-a-toyota-corolla/

Corolla rear brakes 2004

We're offline for a tune-up, we'll be up and running smoothly very soon.

In the meantime, here are some other options available:

Visit an
Advance Auto Parts store
Sign up for
SpeedPerks Rewards
View us on Social Media


We appreciate your patience – on your next visit, use coupon code PS20 for 20% off your purchase.

We look forward to serving you,
The Advance Team


Sours: https://shop.advanceautoparts.com/find/toyota-corolla-brake-pads-shoes-and-components.c
corolla 2005 rear drum brakes, replacement and removal

At that time, a young couple, Like a primitive family, Tastes the devil's gift, And Not afraid of a damn thing. And, looking at the trio, What attracted like a magnet, Going down, did not step, almost, Under the bush that their intimacy keeps. My look, the wrong leaves, Attached to the family secret, Opened to the last point Through the treacherous shadow shield.

A friend arched as a panther And clings, and groans, as he sings, He - as if an unfaithful woman, B interrogation, my chest crumples. I turned away.

You will also be interested:

Called Mayhew. By the way, the word "jizz" is quite an interesting history. It is as old as "fucking", "crap" and other similar words, but it continued to be removed from the dictionary for a long time after all.

1586 1587 1588 1589 1590