Ironwear 4947 Evolution CG-3 Cut Resistant Level A8 | 15 gauge Glove with TPR Protection | Nitrile Palm Coating
The Ironwear Evolution CG Series delivers lightweight ANSI/ISEA A8 cut protection with unprecedented dexterity and comfort. These 15 gauge gloves are knit with a unique blend of steel, HPPE, and additional fibers. Enhance your hand protection with seamless Evolution CG gloves that maintain tactile sensitivity without sacrificing necessary high level cut protection. Defend your hands with the Ironwear Evolution CG-3 glove built for impact. High visibility TPR lines the back of the fingers and hands to provide ANSI / ISEA 138-2019 level 2 impact protection while hook & loop closure prevents glove slippage. Additionally, black sandy nitrile palm coating resists oils and solvents while providing a firm grip in wet or dry applications. The Evolution CG-3 provides you with high level cut resistance making them the perfect fit for any job.
- Collares santería significados colores
- Free spatial reasoning test questions and answers
- Xfinity wifi connected but no internet access 2019
- Fbi jobs columbia sc
- Fireplace gas valve kit
Cut-Resistant Gloves: Levels Explained
When it comes to cut-resistant gloves, levels are a helpful way to categorize the toughness of the fabric and its ability to withstand contact with blades, chemicals, or heat. OHS experts seek hand-protection gloves that shield appropriately but ideally still allow a fair bit of flexibility for fine motor control. It’s a balancing act to find the right glove for each application.
What Are Cut-Resistant Glove Levels?
In order to create a common language, various organizations have defined industry standards for glove protection. In Europe, the main body regulating this is the European Commission, commonly referred to by the acronym CE (Conformité Européene). The American National Standards Institute, or ANSI, plays the same role in North America. ANSI was founded in 1918 as a private, non-profit organization representing engineering and government agencies. While both ANSI and CE glove-level certifications are similar, this article examines the ANSI standard.
The United States Occupational Health and Safety Administration (OSHA) requires hand protection, but does not specify specific cut resistance levels, leaving this determination to safety managers. This is why ANSI distinctions are a helpful resource. ANSI’s glove protection levels were first established in 1999, and revised in 2005, 2011, and again in 2016. These revisions reflect innovations in the development of safeguarding materials and offer improvements in the ratings system that helps OHS experts find appropriate protective gear.
What’s New in ANSI’s 2016 Cut-Resistant Glove Levels?
Until recently, ANSI categorized gloves into five different levels of cut resistance. This scale was refined in 2016 to allow further distinctions. It’s important to note that pre-2016, ANSI cut levels allowed testing from two different machines: the TDM-100 machine or the CPPT machine. The new standard does away with this potential source of confusion and specifies that cut resistance levels must be determined by the TDM-100 machine, which measures what level of load (in grams) a glove can withstand from a new blade before the material is penetrated.
The new ANSI scale, characterized by an ‘A’ in front of level numbers, is as follows:
A1 - Protective gloves, Level 1: withstands 200 g to 499 g of cutting load
A2 - Protective gloves, Level 2: withstands 500 g to 999 g of cutting load
A3 - Protective gloves, Level 3: withstands 1000 g to 1499 g of cutting load
A4 - Protective gloves, Level 4: withstands 1500 g to 2199 g of cutting load
A5 - Protective gloves, Level 5: withstands 2200 g to 2999 g of cutting load
A6 - Protective gloves, Level 6: withstands 3000 g to 3999 g of cutting load
A7 - Protective gloves, Level 7: withstands 4000 g to 4999 g of cutting load
A8 - Protective gloves, Level 8: withstands 5000 g to 5999 g of cutting load
A9 - Protective gloves, Level 9: withstands 6000 g or more of cutting load
Slice Blades and Cut-Resistant Work Gloves
We’re often asked where Slice® finger-friendly® blades fit in terms of ANSI cut resistance levels. In early 2017, we hired MEI-Charlton (MEIC) to run independent tests comparing Slice safety blades to standard metal blades. These tests were performed after the new cut-resistant glove levels were established and they reflect 2016 standards. MEIC tested safety work gloves with different ANSI ratings using the same methodology for all blades: a constant load was applied over a 20 millimeter cut distance.
Slice vs Metal: The Results Are In
MEIC found that Slice blades produced a partial cut through Level A1 gloves: enough to allow some light to penetrate the fabric after the cut. Our blades were unable to cut through any glove rated A2 or above. Standard metal blades made a partial cut through Level 4 cut-resistant gloves and did not penetrate Level 5 cut-resistant gloves, or any gloves rated A5 or higher.
Hand protection policies are best determined at the company level, but any opportunity to switch to a lower level of cut resistance is a chance to save money on safety-cutting gloves without sacrificing workers’ hands. As an added bonus, lower level gloves are cooler and more flexible. This increases worker comfort and lowers the likelihood of hand strain and poor grip, both of which can cause accidents.
Ceramic Safety Blades: a Different Kind of Hand Protection
Some of the protection offered by Slice blades has more to do with the advanced ceramic material than our proprietary safety grind. All engineered ceramics (that is to say, those that are 100 percent pure zirconium oxide) are non-conductive, non-sparking, non-magnetic, chemically inert and never rust. They are also safe for autoclave use, as they can be heated up to 1600 degrees Celsius. And unlike metal blades, they don’t require any special oil coating that has to be removed or mitigated because it might react with any materials you’re cutting. Although these features have little to do with laceration protection, they add to the overall hand safety value of Slice blades.
Making Informed Hand Safety Decisions
Slice doesn’t make specific recommendations for glove cut levels, but this testing shows that applications that require gloves rated A5 when using metal blades may be candidates for A2, A3, or A4 gloves when using Slice ceramic safety blades. We recommend that companies perform their own field testing before altering their existing glove policy. Some of our customers tell us that they have reduced glove levels or eliminated safety gloves altogether after switching to Slice tools.
All Slice ceramic safety blades feature our proprietary finger-friendly® grind and are designed with safety in mind. We encourage a strong safety culture in the workplace, which extends to all PPE (Personal Protective Equipment). When examining cut-resistant gloves, levels are an important starting point to find the best protection balance to keep workers happy, productive and most of all, safe.
MATA502 Cut Resistant Gloves – ANSI A8 Cut, Level 3 Abrasion Resistance
When protection and durability are critical, look to MATA502 gloves featuring the latest innovations in ATA® fiber technology. With remarkable ANSI A8 cut and level 3 abrasion resistance, these 7 gauge gloves are a long-lasting solution to extreme cut hazards.
- Part of a comprehensive line of high cut, 7 g gloves that lets you choose the exact cut level you need, from A6 to A9
- The breakthrough comes from our next gen ATA® fiber technology
- During in-plant trials, users reported these gloves lasting 3 times longer than those they replaced
- Third-party wash testing showed no holes or fraying, even after 9 washes
- Additional performance options include a PVC pattern that increases the glove’s gripping power, abrasion resistance and wear life
- Add a reinforced thumb crotch to improve durability and hand protection, making the gloves ideal for demanding applications
- Optional moisture wicking STA-COOL plating keeps the wearer dry and comfortable, wicking moisture away from the skin
- Made in the USA
S, M, L, XL, 2XL
|End Use Market|
ATA Fiber Technology
|ANSI Cut Level|
|ANSI Abrasion Rating|
Machine Wash, Dry Clean
Product Spec Sheet
You may also like…
Other Products You Might Like
Cut gloves a8 resistant
Shop for ANSI/ISEA Cut Level A8 Rated Industrial Work Safety Gloves
ASTM ANSI/ISEA 2016 Performance Level A8 Cut-Resistant industrial work gloves are rated for 5000 - 5999 grams to cut for high cut hazards. A8 cut-resistant gloves are ideal for metal stamping, metal recycling, pulp & paper (changing slitter blades), automotive assembly, metal fabrication, sharp metal stamping, glass manufacturing, window manufacturing, recycling plant/sorting, HVAC, food prep/processing, meat processing and aerospace industry. We offer glove styles with specific coatings and grips that can enhance abrasion, puncture and tear resistance.
If you have questions about what level of hand protection you need, give our Technical Support Reps a call at +800-274-4637. Contact MDS for similar gloves not listed, samples or for volume discounts today!
Browse the Section Below to Explore the Full Line of A8 Cut-Resistant Safety Gloves
She was a brunette, and she should have been punished for her passion for a slender chess player. Even if she came to apologize and repent. Coming. I slept in a shirt and trousers, and throwing a handful of water in my face and smoothing my hair was a matter of minutes. She stood at the gate in a dazzling white dress, either a graduate or a bride, and the morning sun pierced right through him.
You will also be interested:
- Yamaha 250 top speed
- Thin head wrench set
- Ford fabric for sewing
- 2020 supercross track map
- Scent lok jacket sale
- Brushed nickel plumbing fittings
- Card cash exchange reviews
- Gay wedding decor ideas
- T mobile 30 refill
- Air force master sword
- Newest toby mac song
- Netflix star ratings reddit
- Wild republic dinosaur egg
Getting up, hastily wiped herself off with her stringim, put on a sundress on her naked body, looked out into the corridor. - there was no one, she quickly slipped into the bathroom to clean herself up and think about the adventure that had happened. gain strength and run again to have fun - after all, the whole night is still ahead.
she still did not understand who just fucked her like a wild beast. but it was nice-Cool wedding.